ThiSun Full-Spectrum Solar Simulator

Full-Spectrum Solar Simulator

ThiSun Series reproduces a near-sunlight spectrum and irradiance indoors with metal halide lamps for durability and reliability testing in automotive, rail and energy.

Full-Spectrum Solar Simulator

Diurnal Solar Simulator

ENVIRONMENTAL TESTING & EVALUATION

Environmental Testing & Evaluation

ThiSun Full-Spectrum Solar Simulator

Real sunlight, indoors: full-spectrum solar simulation for performance, durability, and reliability testing

Repeatable solar radiation testing with precise control of irradiance and uniformity

Products in the automotive, railway, electronics, energy and testing & certification industries are repeatedly exposed to strong solar radiation and heat loads in real operation. These conditions directly affect material deformation, surface degradation, display visibility, seal damage, the stability of electronic components and product lifespan.

The ThiSun series reproduces these conditions repeatably in laboratories, climate chambers, and climatic wind tunnels. Metal halide light sources with electronic power supply (EPS) control deliver a spectrum close to natural sunlight and stable, consistent irradiation.

VISOL designs each system based on the customer's test standards, irradiation area, installation space, distance between light source and test object, and uniformity requirements, providing a solar irradiation test environment optimized for product development, quality verification, certification testing and reliability evaluation.

Reference standards: CIE 241:2020 · ASTM G173 · IEC 60904-9

ThiSun 4000

4 kW solar simulator for large test areas and high irradiance

A 4,000W-class full-spectrum solar simulation system suited for automotive, photovoltaics, large components and testing & certification that require large test areas and high irradiance. With Metal Halide light sources and EPS-based output control, it delivers a spectrum close to real sunlight and a stable irradiation environment, and multiple light sources can be arrayed to cover large test areas.

# Metal Halide Lamp 4,000W

# Full Spectrum Global Solar Radiation

# Irradiance 400 ~ 1,200 W/m²

# EPS Module-based Dimming Control

# Array configuration for large test areas

ThiSun 2000

2 kW solar simulator for space-constrained climatic wind tunnels

A 2,000W-class full-spectrum solar simulation system suited for climatic wind tunnel (CWT) environments with limited installation space, such as tests of high-speed trains and other large vehicles. It is suited for short-distance irradiation and partial-area test setups, and can be configured as an economical solar simulation facility for large climatic wind tunnels or as a standalone solar simulation system.

# Metal Halide Lamp 2,000W

# Full Spectrum Global Solar Radiation

# Suited for short-distance and partial test setups

# Economical large-scale CWT Solar Simulation

# Standalone Solar Simulation System configuration

Item

Integrated solar simulation control software

One interface for simulators, power supplies, and positioning

ThiSun control software is an operating program that manages the status and test conditions of solar simulators, electronic power supplies and positioning systems in one place. Its screen layout mirrors the actual installation, allowing irradiation conditions to be controlled per light source or by group, and it supports saving and loading test conditions, real-time status display, operating time management, and fault and alarm checks. Manual control, group control, automatic test condition operation and positioning control can be configured selectively according to the customer's test purpose and installation environment.

# Individual / Group Control

# Profile Save & Load

# Real-time Status Monitoring

# EPS Dimming Control

# Positioning System Integration

# Operation Time & Alarm Display

Input Power · ThiSun 4000: AC380V / 3PH / 4Wire / 50 ~ 60Hz · ThiSun 2000: AC220V / 1PH / 50 ~ 60Hz

Dimming Range · ThiSun 4000: 1% level (50% ~ 100%) · ThiSun 2000: 1% level (50% ~ 100%)

Light Source · ThiSun 4000: Metal Halide 4,000W · ThiSun 2000: Metal Halide 2,000W

Type · ThiSun 4000: Flood Type · ThiSun 2000: Flood Type

Spectrum Radiation · ThiSun 4000: Full Spectrum (280 ~ 3,000nm) · ThiSun 2000: Full Spectrum (280 ~ 3,000nm)

Irradiance · ThiSun 4000: 400 ~ 1,200 W/m² · ThiSun 2000: 400 ~ 1,200 W/m²

Operation Temp./Humidity (EPS) · ThiSun 4000: 0℃ ~ 35℃ / No Dew · ThiSun 2000: 0℃ ~ 40℃ / No Dew

Operation Temp./Humidity (Luminaire) · ThiSun 4000: -10℃ ~ 60℃ / ~ 80% · ThiSun 2000: 10℃ ~ 50℃ / ~ 80%

Products

Specification

Industries

Core Technologies & Features

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

✓

The ThiSun Series precisely reproduces the real solar spectrum and radiant energy to provide a repeatable Solar Radiation Test environment.

Full-Spectrum Solar Radiation

Full-spectrum sunlight reproduction — Implements Full-Spectrum Solar Simulation based on key reference solar spectra such as CIE 241:2020 and AM1.5G.

Key Features

CIE 241:2020

AM1.5G

Global Solar Radiation

Adjustable Irradiance Control

Variable irradiance control — Irradiance conditions from 400 to 1,200 W/m² can be configured for each test purpose, with EPS-based output control.

Key Features

400~1,200 W/m²

EPS output control

Dimming Control

Uniform Irradiation Area

Uniform irradiation area — Light source arrays and positions designed for the test area provide a uniform, repeatable Solar Radiation Test environment.

Key Features

Uniform irradiation

Light source array design

Repeatability

Modular Array Configuration

Modular light source arrays — Array-based configurations scale from single products and partial tests to large vehicle, railway and component tests.

Key Features

Array configuration

Large-area expansion

Modular System

Chamber & CWT Integration

Integration with climate chambers and climatic wind tunnels — Light sources, power and positioning control are designed together, taking into account installation conditions inside Climate Chambers and Climate Wind Tunnels.

Key Features

Climate Chamber

Climate Wind Tunnel

Integrated design

Test Automation Software

Test automation control software — Manages test profiles, light source groups, positioning and status monitoring in software to improve repeated test efficiency.

Key Features

Profile management

Status monitoring

Test automation

IEC 60068-2-5

Representative test standard for Solar Simulators in general industrial environmental testing

DIN 75220

Test standard for evaluating solar radiation load and thermal aging of automotive components

SC03 / AC17 (EPA 40 CFR 1066.835)

Test standard for evaluating the effect of air conditioner operation on emissions and fuel economy in high-temperature environments

IEC 61215-2 / 61853-1

Standard for evaluating the output and performance of PV modules under different irradiance conditions

UIC 553-1

Railway vehicle test standard for evaluating the interior thermal environment and heating/cooling performance of passenger coaches under solar heat load

Application 01

Automotive & Mobility — Solar load validation of complete vehicles, electronics, sensors and thermal management components

Solar exposure and heat load evaluation of vehicle interior/exterior materials and electronics

Checking the effect of solar conditions on HUD, LiDAR, camera and ADAS sensor performance

EV and hydrogen vehicle cabin / HVAC / thermal management tests

Application 02

Railway & Transportation — CWT-based solar radiation tests of railway vehicles and large transport

Railway cabin cooling performance and passenger thermal comfort evaluation

Partial and full-vehicle solar tests of large structures such as high-speed trains, aircraft and special vehicles

Solar Simulation setups based on large-area uniformity and fixed incidence angles

Application 03

Electronics, Materials & Energy — Long-term reliability evaluation of electronics, materials and ESS·PV components

Degradation and durability evaluation of electronic devices, displays, coatings and polymer materials

Checking solar performance of ESS chillers, battery pack surroundings and thermal management components

Spectrum- and irradiance-based performance validation of PV and solar materials

Application 04

Aerospace & Defense — Solar radiation resistance validation of military, aviation and outdoor equipment

Solar exposure tests of military equipment, shelters, outdoor electronics, sensors and coatings

Fixed-irradiance Solar Radiation Resistance / High-temperature Exposure setups

Building standards-compliant test environments for defense and export equipment

Let's configure the right solution for your test environment

Our engineers will help you define a custom configuration and detailed specifications to match your test objectives and facility.

Full-vehicle solar load test

Field: Automotive

Purpose: Cabin heat load, A/C performance and comfort

Test standard

SC03

Aerospace solar test

Field: Aviation

Purpose: Solar exposure and durability of aviation materials and parts

Test standard

IEC 60904-9

Railway vehicle solar test

Field: Railway

Purpose: Railway cabin climate, HVAC and passenger comfort

Test standard

UIC 553-1

PV module certification testing

Field: Solar cells

Purpose: Certification and reliability testing of PV cells and modules

Test standard

IEC 61215

IEC 61646

Indoor solar exposure test

Field: Electronics and materials

Purpose: Discoloration, aging and heat rise of indoor electronics and materials

Test standard

ASTM G24

ASTM G155

Sealant exposure & durability test

Field: Building materials

Purpose: Solar degradation of sealants, adhesives and building materials

Test standard

IEC 60904-9

What is a Solar Simulator?

A Solar Simulator is environmental test equipment that reproduces the spectrum and radiant energy of natural sunlight indoors to evaluate solar exposure, heat load, durability and performance changes of products.

How is the ThiSun Series different from Diurnal Solar?

The ThiSun Series performs Solar Radiation Tests based on constant irradiance and a full-band spectrum, but its minimum irradiance is about 400W/m². Irradiance changes down to 55 W/m² at sunrise and sunset, as required by Military Standards, are only possible with the ThiSun Diurnal line.

How close is it to real sunlight?

The ThiSun Series is designed to target Full Spectrum Global Solar Radiation based on CIE 241:2020 and AM1.5G, and irradiance and uniformity can be adjusted for each test purpose.

Which industries use it?

It is used for solar radiation exposure tests, heat load evaluation, weathering tests and reliability evaluation in automotive, railway, electronics, materials, PV/solar, testing & certification bodies and research institutes.

Can it replace outdoor exposure tests?

It can replace or complement them depending on the purpose. Outdoor tests are useful for confirming real-world conditions, while the ThiSun Series provides repeatable indoor conditions that improve test efficiency during development and certification preparation.

Can it be installed in a Climate Chamber or CWT?

Yes. VISOL reviews chamber size, light source mounting height, irradiation area and positioning conditions to design a custom Solar Simulation System.

How are irradiance and uniformity determined?

They depend on light source output, number of sources, installation distance, incidence angle, array layout and the shape of the test object. VISOL performs pre-simulation and system design based on your requirements.

How do I choose between ThiSun 2000 and ThiSun 4000?

ThiSun 4000 suits large irradiation areas and high irradiance, while ThiSun 2000 can be considered for short-distance irradiation, partial tests, space constraints or when cost efficiency matters.

Is custom manufacturing available?

Yes. Systems can be designed for your irradiation area, target irradiance, uniformity, control method, Positioning System and Chamber/CWT Integration requirements.

Do you also offer LED Solar Simulators?

VISOL is developing an LED-based Solar Simulator, scheduled for release in 2027.