Passive Safety · Crash Test Equipment & Barriers

Passive Safety

Passive safety test solutions from crash test facilities and barriers to pedestrian and occupant injury assessment, supporting UN ECE, FMVSS and NCAP testing.

Passive Safety

High Speed Lighting

Active Safety

Vehicle Dynamics & Endurance

SAFETY TESTING & EVALUATION

Safety Testing & Evaluation

Passive Safety

Crash test equipment, barriers, and occupant and pedestrian injury assessment for passive safety validation

Validation you can trust, for global crash regulations and occupant protection

"From components to complete vehicles, we reproduce real-world crashes in the lab with the fidelity your data demands."

Meeting international crash regulations (UN ECE, FMVSS) and demanding NCAP protocols requires precise physical data at the limits of vehicle behavior. VISOL's integrated passive safety lineup covers that full range, from low-speed bumper impacts to high-load structural stiffness testing and biofidelic injury measurement.

ERNST

Mobile Crash Block

A mobile crash wall that handles variable multi-track crash tests

Flexible facility layout — Unlike fixed crash walls, it is placed at the center of the facility where multi-angle tracks intersect, flexibly supporting multi-directional crash scenarios as required.

Precise hydraulic positioning — Durable hydraulic lifting running gear moves it precisely at 10 m per minute to quickly reach the desired test position.

Optimized for car-to-car tests — For car-to-car tests, the hydraulic system quickly moves the wall out of the pit or to a standby area to secure a clear driving space.

Ultra-high rigidity with ground anchoring — Within minutes of positioning, built-in automatic ground anchorage and a hydraulic locking system combine to provide a fixing force that withstands impact loads of up to 3.9 MN and high G-forces.

Additium

Propulsion System

An AC motor-based high-precision vehicle tow system for crash tests

Precision meeting global certification standards — Combining a high-performance electric motor with precise inverter control, it accelerates and controls the target impact speed required by regulations within an ultra-precise tolerance of ±0.1 km/h.

Covers diverse crash scenarios — It covers a wide weight range from small cars to large commercial vehicles and EVs, delivering optimal towing force for the severe crash conditions planned by each lab, including frontal, side and offset impacts.

Reliable wire release mechanism — At the moment just before impact when the target speed is reached, the tow wire is released safely with precise timing, guaranteeing pure crash behavior in a completely free-running state without external interference.

ERNST

Mobile Barriers

A high-precision mobile crash trolley on chassis meeting the latest global standards, with an independent emergency braking system for safe testing

Broad NCAP and regulatory lineup — Supports dedicated chassis and front shields for aluminum honeycomb barriers that meet major European and North American crash safety protocols, including MPDB, AE-MDB, ECE-R95, FMVSS 214 and the latest IIHS 2.0.

Built-in emergency brakes — To prevent secondary collisions caused by rebound, ERNST's proprietary emergency braking system acting powerfully on all wheels simultaneously is fitted as standard.

Corrosion-resistant frame with protective design — All brake lines are embedded within the frame structure to prevent damage to the braking system from debris or impact during testing.

Ultra-precise center of gravity and alignment — For accurate, highly repeatable crash data, the trolley's center of gravity and moment of inertia are strictly calibrated before delivery, and a dedicated center marking system is included for quick alignment with propulsion/tow systems.

AFL

Honeycomb Barriers

High-reliability honeycomb barriers meeting major global standards

Over 25 years as a global passive safety partner — For over 25 years, through close collaboration with global automakers and accredited crash test labs (UTAC CERAM, Euro NCAP, NHTSA and others), it has supplied barriers that achieve full correlation between precise computer simulation models and real crash behavior.

Mass production and custom manufacturing — Under strict quality control (ISO 9001:2015) by the R&D department at its French headquarters, it offers stable mass supply of global standard products as well as custom honeycomb design (products on demand) to the specifications of special-purpose tests and advanced development scenarios.

Front Impact Barriers — Meets PDB-XT and OMDB, as well as the latest Euro NCAP MPDB (Moving Progressive Deformable Barrier) Version 1.2, which precisely validates crash compatibility between two moving vehicles.

Side Impact Barriers — A complete lineup of barriers meeting ECE R95, AE-MDB, the US FMVSS 214 (with NHTSA standard specifications and certificates of conformity), FMVSS 301/305 and the more severe IIHS Version IV (reflecting new trolley mass and speed).

AFL

RCAR Bumper

Standard deformable barriers compliant with RCAR (Research Council for Automobile Repairs) standards

Meets global RCAR low-speed crash standards — Satisfies the RCAR standard specifications for low-speed front and rear crash tests (15 km/h standard) conducted by major insurance research institutes and automakers worldwide.

Key to insurance rating and insurability assessment — By precisely simulating the impact energy transmitted to the bumper system and front body frame, it objectively verifies damageability and repairability in real accidents and supports insurance rating.

Thorough quality certification and documentation — Produced under an ISO 9001:2015 quality management system, each barrier comes with official certified data sheets and test reports proving conformity with global test standards (AZT, RCAR and others), ensuring lab data reliability.

Additium

Multi E-Launcher

A high-precision multi-purpose launch system that performs pedestrian injury tests and vehicle interior/exterior impact evaluations with innovative linear motor drive technology

Latest linear motor propulsion — Unlike conventional pneumatic/hydraulic launchers, it uses precise electric servo technology to control launch speed finely and accurately, providing a precise test environment without concerns about oil leaks or pressure loss.

Pedestrian protection compliance — Supports impactor launches for pedestrian safety ratings required by Euro NCAP, CNCAP and global regulations (GTR 9 and others). (Supports adult and child headforms, Flex-PLI and the latest aPLI legforms, and upper legforms)

Plug-and-play multi-purpose expandability — Based on a single main propulsion system, simple module changes enable not only pedestrian protection tests but a full range of derivative tests, including dashboard impact, interior headform impact (FMVSS 201U), ejection mitigation (FMVSS 226), sunroof and battery pack impact tests.

Additium

E-SBA (Seat Belt Anchorage) Test System

A high-load test system that precisely verifies the limit strength of seatbelt anchorages with electric servo actuator control

100% electric servo system — Using purely electric servo actuators that eliminate the oil leaks and ongoing maintenance costs of hydraulic systems, it maintains a controlled, clean lab environment and maximizes energy efficiency.

Compliance with global safety regulations — It meets the global standards for evaluating the strength of seatbelt anchorages, the last line of defense holding occupants in a crash, including UN ECE R14, FMVSS 210 and ISO 27955/27956 (cargo restraint strength).

Independent precise load and displacement control — Independent electric servo control on each channel allows loads of several tons to be applied simultaneously and with high repeatability to the seat and anchorage points at the very slow, constant quasi-static speed required by regulations.

Flexible modular frame structure — A high-rigidity frame design allows easy reconfiguration of the multi-channel actuator layout, covering front and rear seats of passenger cars and SUVs as well as seats and body structures of large commercial vehicles.

Additium

E-HRP (Head Restraint Performance) Test Rig

A safety evaluation test system that precisely verifies the support strength of vehicle seat head restraints with precise electric servo control

Precise loading with electric actuators — Moving beyond hydraulics, high-performance electric servo actuators apply fine, constant quasi-static loads to the head restraint structure with precision while precisely tracking and measuring displacement.

Compliance with global head restraint regulations — It satisfies the strict US and European vehicle safety standards FMVSS 202A, UN ECE R17 and ECE R25, reliably evaluating the structural strength of seatbacks and head restraints to minimize occupant whiplash in rear impacts.

Automated testing with integrated control software — Dedicated Additium software monitors all load ranges (torque, force) with high resolution (16-bit) and accuracy and automatically controls the loading process, maximizing data analysis efficiency.

Additium

RCSI (Roof Crush & Side Intrusion)

A large stiffness test system that precisely verifies the limit load structure of body frames and roofs

Verifying key indicators of body structure safety — It supports integrated evaluation of roof crush resistance, which protects occupants' heads and spines in rollovers, and side intrusion resistance, which measures how far the body is pushed inward in side impacts.

Compliance with global body stiffness regulations — It complies with NHTSA safety standards FMVSS 216a (Roof Crush Resistance) and FMVSS 214 (Side Impact Protection), as well as IIHS (Insurance Institute for Highway Safety) protocols and GB 15743 (Chinese safety standards).

Various actuator options — Customers can choose between electric servo actuators that efficiently deliver clean, precise data and hydraulic actuators suited to high-load, high-strength tests.

Additium

EAITR (Energy Absorption Impact Test Rig)

A high-reliability impact test system that evaluates bumper energy absorption in low-speed impacts with precise control of gravity drop acceleration

Compliance with global bumper safety regulations — A dedicated test system designed and validated to meet bumper impact mitigation standards in major automotive markets including Europe, the US, China and Canada.

- UN ECE-R42: European bumper impact standard - FMVSS Part 581: US Federal Motor Vehicle Safety Standard for bumper systems - GB17354-1998: Chinese national bumper standard - CMVSS 215: Canadian Motor Vehicle Safety Standard for bumpers

Test sequence automation software — Intelligent software automatically calculates the optimal drop height when the user enters the target impact speed and energy.

Built-in secondary impact brake — Built-in safety mechanisms, including a secondary impact brake to protect operators and equipment

Additium

Bumper Pendulum

A gravity-type impact test system that validates global bumper crash regulations with variable mass of up to 3,500kg and a high-precision pendulum mechanism

Compliance with global bumper safety regulations — A dedicated test system designed and validated to meet bumper impact mitigation standards in major automotive markets including Europe, the US, China and Canada.

- UN ECE-R42: European bumper impact standard - FMVSS Part 581: US Federal Motor Vehicle Safety Standard for bumper systems - GB17354-1998: Chinese national bumper standard - CMVSS 215: Canadian Motor Vehicle Safety Standard for bumpers

1,000kg – 3,500kg variable mass system — To cover every vehicle type on the market from small sedans to heavy EVs, large SUVs, pickup trucks and commercial vehicles, the impactor mass can be configured with modular plates from a minimum of 1,000kg to a maximum of 3,500kg.

Transpolis

APTS (Abdominal Pressure Twin Sensors)

A patented fluid-filled abdominal sensor that faithfully simulates the impact behavior of human abdominal tissue to precisely measure the risk of abdominal injury from seatbelts and child seats in a crash

The global standard for predicting submarining and abdominal injury — The world's only proprietary solution that predicts with data the fatal submarining phenomenon, in which the seatbelt slips off the pelvis and strikes the abdomen directly at impact, and the risk of injury to internal organs of the abdomen, chest and pelvis.

Biofidelic fluid-elastomer technology — A soft cylindrical structure filled with a special viscous fluid achieves the same flexibility and stiffness as real human abdominal soft tissue, maximizing the biofidelity of measurement data.

Required for the latest global child seat and NCAP standards — Officially adopted in the standard specifications of UN ECE R129 i-Size (replacing R44), the latest European child seat certification standard, it has become the standard sensor for Q-Dummies used in infant/child crash safety protocols of major NCAPs worldwide, including Euro NCAP.

Full lineup integration by vehicle and dummy — A modular lineup is mounted vertically in twin pairs according to dummy size, and coverage has recently expanded to precise abdominal injury validation for adult occupants through the expansion project (ABISUP) for the latest adult dummies THOR 5-F and THOR-M (Adult ATD).

SAE compliance and total precision calibration support — It contains miniature pressure cells that withstand severe crash pressures and signal conversion electronics, and supports Sensitivity and Biofidelity calibration certificates through a dedicated test bench meeting the SAE J211 and SAE J2570 international standards.

Products

Let's configure the right solution for your test environment

Our engineers will help you define a custom configuration and detailed specifications to match your test objectives and facility.